Drywall fiberglass mesh

Width: 25, 35, 48, 50, 100, 150, 200, 100 mm

Length: 10, 20, 30, 45, 90, 153 m

Gram weight:50-80 grams / square meter

Self-adhesive Fiberglass Mesh Tape, Fiberglass Products 1000 mm

Description:

Self adhesive tape is cut by alkaline resistant fiberglass mesh which is treated by adhesive latex.

Fiberglass self-adhesive mesh tape has good Self_adhesive, faster application, no pre-plastering required, easy to apply, resists cracking, do no rot, no blisters or bubbles, more environmentally_friendly job. It won't tear, shrink, stretch or bubble, while it hides joints, cracks and holes permanently. 

Width(mm): 25, 35, 48, 50, 100, 150, 200, 1000. 
Length(m): 10, 20, 30, 45, 90, 153 
Mass: 55_85g/sq. Meter. 
Mesh: 8*8 or 9*9 mesh/Inch 
Colour: White, yellow, blue etc... 
Drywall seaming tapes as well as private label and 
Unlabeled tapes. 
Each roll is shrink-wrapped, or plastic hand bag. 
0ther specification are available upon request. 

1. Pass CE, TUV, ITB, ETAG04, ISO9001 
2. Lowest anti dumping rate to EU in China 
3. One of the biggest producers in China 

Main properties:
excellent alkali resistance, durable; high tensile strength and resistance to anti-deformation, anti-crack, not deteriorate, don't arise bubble; Excellent self-adhesive, no need the primer in advance, use the quick and easy in construction.
Size: 8 × 8 / 9 × 9 mesh / Inch
Gram weight:50-80 grams / square meter
Width :25-1000 mm
length :10-153 m
Color: usually white or other colors

Application

It's widely used in any commercial or residential application of drywall finishing repairing the cracks and joints or holes of drywall, plasterboard, stucco and all kinds of wall cracks and ceiling cracks. 

Specification
Width(mm): 25,35,48,50,100,150,200,1000
Length(m): 10,20,30,45,90
Mass: 65 or 70g/sq.meter

Mesh:9x9mesh/inch.
Color: white, yellow, blue etc.
Drywall seaming tapes as well as private label and unlabeled tapes.
Each roll is shrink-wrapped.

How to use:
1. Wall must be clean and dry.
2. Center and apply tape over the length of the joint and pressing firmly.
3. Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape.
4. Let dry completely, then sand slightly.
5. Apply sufficient thin finishing coats to produce a smooth wall surface.
6. Cut of butted boards do not have a tapered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.

Competitive Advantage:

Competitive price, good quality